ArborSonic3D is an acoustic tomograph used for non-destructive testing of trees, which can produce a map of internal velocities of a cross-section.
Detects the size and location of decayed or hollow regions
Measures sound travel time between sensors
Determines velocities from the measured time and geometry
The software calculates cross-sectional velocities
Fast: a measurement can be completed in 5-10 minutes
3D model using multiple layers
Wind load modeling including EN1991
USAGE INSTRUCTIONS
Drive the sensors through the bark using a rubber hammer with even spacing around the trunk.
Measure the distances between the sensors with a caliper and enter the measured data to the computer.
Tap each sensor with a steel hammer to generate sound waves. ArborSonic 3D measures the travel times with microsecond precision to each sensor and transmits the data to the computer.
The software calculates and displays the internal sound-velocity distribution of the tree.
Measurements taken at various heights can be assembled into a 3D model.
PACKAGE CONTENTS
SD02 Piezo transducers
Amplifier boxes
Battery box
Cables to connect amplifier boxes and battery box
Sensor remover tool
Tape measure
Steel hammer for tapping transducers
Rubber hammer for mounting the transducers
Peli case
2pcs. of rechargeable 9 V block batteries
Battery charger
User's manual
ArborSonic 3D Software
Caliper for measuring sensor positions (optional)
Specification | Details |
|---|---|
Measured time precision | ± 2 microseconds |
Sensor | Low noise SD02 piezo sensor |
Number of sensors | Variable from 10 up to 32 |
Amplifier box size | 127 × 58 × 25 mm |
Power consumption | 240 mW |
Power supply | Standard (rechargeable) 9V block battery |
Continuous operation time* | Approximately 2 hours |
Carrying case | Peli Case 1500EU |
Total weight** | 6 kg |
PC connection | USB or Bluetooth |
Data transmission time per sensor tap | Below one sec |
Total measurement time of one tree*** | 20 minutes |
Operating temperature range | 0–40 °C |
*with one battery
**without PC, including Peli case, hammers and 10 sensors
***one cross-section, including assembly, geometry modeling, measurement and disassembly, using 10 sensors