ONSET HOBO U14-002 External Temperature/RH LCD Data Logger

The HOBO U14 LCD External Temperature/Relative Humidity Data Logger displays and records temperature and humidity conditions.

  • Product Name:ONSET HOBO U14-002 Temperature/RH LCD Data Logger
  • Model:U14-002
  • Maunufactor:Onset
  • Country:USA


The HOBO U14 LCD External Temperature/Relative Humidity Data Logger displays and records temperature and humidity conditions. It is well-suited for use in manufacturing, processing, and storage environments where reliable monitoring and documentation of specific temperature/relative humidity conditions are critical. Data is offloaded via USB to a PC or Mac computer. An alarm display and built-in relay for use with Onset's Remote Alarm and/or Autodialer accessories assure timely notification of alarm conditions.

Highlighted Features

Faster USB data download time

Improved Temp/RH sensor resolution

Real-time display of Temperature and RH

Alarm display and output ensure timely notification of out-of-range conditions

Two models to choose from - internal Temp/Relative Humidity or external Temperature or Temperature/Relative Humidity

Optional Remote Alarm and Autodialer

Optional protective case for wet or condensing environments

Compatible with HOBOware and HOBOware Pro software for logger setup, graphing and analysis

In what environment does this data logger operate?

This data logger operates in an indoor environment.

What measurements does this data logger support?

The U14-002 data logger supports the following measurements: Relative Humidity and Temperature


  • Operating temperature range -20°C to +50°C, (-4°F to +122°F) , 0 to 100% RH non-condensing

  • Operating relative humidity range 0 to 95%, non-condensing, noncorrosive environment

Logger Capabilities

  • Capacity:

        Temp and RH: 21,500 measurements

        Temp Only: 43,000 measurements

  • Software-selectable sampling intervals: 1 second up to 18 hours, recording times up to 1 year

  • Programmable start time/date

  • Recording modes: Stop when full

  • Launch Modes: Immediate, Delayed

  • Nonvolatile EEPROM memory retains data even if batteries fail


  • Size: 33 x 50.8 mm (1.3 x 2 inches)

  • Displays temperature and relative humidity simultaneously

  • Displays °C or °F (selectable within host software)

  • Displays memory remaining and battery level

  • Displays flashing ALERT for out-of-limits conditions (selectable within host software) and stops flashing on offload or return to normal range


  • High and low set points for both temperature and relative humidity

  • Selectable delays for each set point.

  • Alert conditions reset on offload or return to normal range.

  • Selectable Contact Relay: Normally Closed or Normally Open

  • Contact rating: 48VDC, 1A max

  • Contact resistance: less than 1 Ohm

  • Wire size range is 22AWG to 14AWG

  • 0% Low Battery Range Communications

  • Offloads data to PC or U-Shuttle via USB cable

  • Readout full logger (64K) in less than 30 seconds


  • Time accuracy: ±1 minute per month at +20°C (+68°F).


  • 3 AAA Alkaline batteries, user-replaceable


  • 125 x 92 x 31 mm (4.9 x 3.6 x 1.2 inches)

  • 170 g (6.0 oz) with batteries

External Sensors

  • For External Sensor Specifications, see the sensor’s user manual.

Battery Life

  • The batteries will last one year in typical conditions (logging intervals of ≥ 1 minute with weekly offloads and average temperatures greater than 10°C or +50°F). Frequent offloads and/or extreme temperatures will reduce battery life.

  • At temperatures below freezing (0°C or +32°F), batteries will typically require replacement every six months. In these conditions the battery level bar graph should be checked regularly.