HOBO Onest U26-001 Dissolved Oxygen Data Logger

Measure oxygen concentrations in lakes, streams, rivers, estuaries, and coastal waters with the HOBO U26 Dissolved Oxygen Data Logger. This affordable and precise data logger is recommended

  • Product Name:HOBO Onest U26-001 Dissolved Oxygen Data Logger
  • Model:U26-001
  • Maunufactor:Onset
  • Country:USA

Measure oxygen concentrations in lakes, streams, rivers, estuaries, and coastal waters with the HOBO U26 Dissolved Oxygen Data Logger. This affordable and precise data logger is recommended for aquatic biology and hydrology research projects. The HOBO U26 uses RDO® Basic (Rugged Dissolved Oxygen) optical DO sensor technology and is easy to maintain.

Includes:

  • U26-001 data logger

  • DO sensor cap

  • Protective Guard

  • Calibration Boot with sponge

The HOBO U26 Dissolved Oxygen logger was part of a multi-year evaluation of DO loggers and sensors by the Alliance for Coastal Technologies (ACT), the results of which are published here. This un-biased report describes how the HOBO U26 performs in lab and field conditions. Note that our response letter, with added recommendations, is attached at the end of the report (pgs 58-59). 

Highlighted Features 
  • Affordable, high performance dissolved oxygen (DO) monitoring with 0.2 mg/L accuracy

  • Optical DO sensor technology for long-lasting calibration with less maintenance

  • HOBOware Pro's Dissolved Oxygen Assistant software corrects for measurement drift from fouling; provides salinity-adjusted DO concentrations and percent saturation

  • Optical USB interface for high-speed, reliable data offload

  • Easy-to-replace DO sensor cap lasts six months

NOTE: 

For DO measurements in saltwater, an adjustment for salinity is required. For waters with small changes in salinity (<2 ppt), a salinity meter reading typically provides enough accuracy. For environments with greater salinity changes, we generally recommend the HOBO U24-002-C conductivity logger . If you need DO in Percent Saturation, barometric pressure data is required, which can be logged with a HOBO Water Level Data Logger (U20-001-04).

In what environment does this data logger operate?

This data logger operates in an water environment.

What measurements does this data logger support?

The U26-001 data logger supports the following measurements: Dissolved Oxygen and Temperature


Dissolved Oxygen

Sensor Type:Optical

Measurement Range:0 to 30 mg/L

Calibrated Range:0 to 20 mg/L; 0 to 35°C (32 to 95°F)

Accuracy:± 0.2 mg/L up to 8 mg/L; ± 0.5 mg/L from 8 to 20 mg/L

Resolution:0.02 mg/L

Response Time:To 90% in less than 2 minutes

DO Sensor Cap Life:6 months, cap expires 7 months after initialization
Temperature

Temperature Measurement/Operating Range:-5 to 40°C (23 to 104°F); non-Freezing

Temperature Accuracy:0.2°C (0.36°F)

Temperature Resolution:0.02°C (0.04°F)

Response Time:To 90% in less than 30 minutes
Logger

Memory:21,700 sets of DO and temperature measurements (64 KB total memory)

Logging Rate:1 minute to 18 hours

Time Accuracy:±1 minute per month at 0 to 50°C (32 to 122°F)

Battery:3.6 V lithium battery; factory replaceable

Battery Life:3 years (at 5 minute logging)

Download Type:Optical

Depth Rating:100 m (328 ft)

Buoyancy:Salt water: 13 g (0.46 oz) negative | Fresh water: 20 g (0.71 oz) negative

Wetted Materials:Black Delrin®, PVC, EPDM o-rings, silicone bronze screws; rated for saltwater use

Size:39.6 mm diameter x 266.7 mm length (1.56 x 10.5 inches)

Weight:272.4 g (9.61 oz)

Environmental Rating:IP68

Description: ceThe CE Marking identifies this product as complying with all relevant directives in the European Union (EU).