Peat Probe

Peat Probe_A portable instrument for defining the properties of peat and other wet materials with low conductivity, in situ.Peat Probe is a quick, reliable and easy to use measuring system for definin

  • Product Name:Peat Probe
  • Manufacturers:Toikka
  • Country of Origin:Finland

Peat Probe_A portable instrument for defining the properties of peat and other wet materials with low conductivity, in situ.

Peat Probe is a quick, reliable and easy to use measuring system for defining the properties of peat. Whereas conventional methods take days, Peat Probe can measure a peat layer of e.g. 2-3 metres deep, from surface to bottom in a couple of minutes 

By recording the electrical parameters of its sensor - resonance frequency, attenuation and 3 dB-band widths - Peat Probe calculates the dielectric constant and, further, the bulk density and the water content of the peat. The results are immediately shown on the LC or LED -display and can be stored in an electrically erasable memory. Afterwards the stored data may be transferred to a normal personal computer and processed with any data processing method if needed. 

Peat Probe is equally suitable for measuring the water content of lake sediments, animal slurries or other wet materials with low conductivity. The electrical parameters the device measures are absolute for the measured material. The calculated density and moisture -values of thePeat Probe are valid when the measured material is peat or some other two-component-material similar to peat. 

The Peat Probe -sensor is a 20 cm long slot located in a metal pipe, 25 mm in diameter. The sensor is simply pushed into the peat layer and activated by pressing a key on the control unit. Measurements are possible down to any depth with the use of additional pipes. 

loka.jpg    suo0052_uusi.jpg

Measures of Septic tank. On the left side of the picture is the water level. The first ~10cm were sediment that floats, next 20cm were liquid and then the rest of the picture is more solid sediment.


Resonance frequency measurement range:      100-160MHz

Dielectric constant measurement range:      50-90

Water content measurement range:      80-100%

Bulk density measurement range:      0-200 kgm -3

Degree of protection:      IP65

Rechargeable 2.5Ah /12V lead battery

OTR:      -20...+50°C, STR:      -40...+80°C

Data transmission:      According to the EIA/TIA-standard (RS232C -bus)

Size and weight:      Electronics box 18cm x 14cm x 29cm/4200g, fork 380g